CDT 2x150A/75V

Back To List
  • Input : 3 x 380V / 50Hz / 25KVA
  • Output : 2 x 150 A (300 A in parallel) / 2 x 75 V
  • Circuits per cabinet : Up to 2
  • Parallel work : Yes

Main features

  • Power supply : 3 x 380 V / 50Hz;
  • Power consumption : up to 25 KVA;
  • Number of independent circuis : 2; Both circuits are galvanically isolated!
  • Output current in charge/discharge mode for each circuit : 0 - 150 A;
  • Output current (charge/discharge) in parallel mode : 0 - 300 A;
  • Output voltage range for each circuit : 6 to 75 V;
  • Wok modes
    • In charge - CC (Constant Current), CV (Constant Voltage), CP (Constant Power);
    • In discharge - CC (Constant Current), CP (Constant Power).;
  • Мean square error of the output current : <= 0.5% + 0.2А;
  • Мicroprocessor control;
  • Centralized control over PC and custom software;
  • Interface for connection to a centralized management system - RS 485;
  • Ability to work in parallel mode to increase output current;
  • Eight galvanically isolated channels for temperature measurement (four per circuit);
  • Sixteen galvanically isolated channels (eight per circuit) to measure voltage in 0-20V range with 1mV resolution and 0.05% FSR accuracy;
  • There is a possibility, if necessary, to add up to 40 additional channels for measuring temperature or voltage;
  • Recording of accumulated amper-hours, watt-hours, output power, current, voltage, etc.;
  • Safety
    • turning off power of power block when circuit is not working;
    • fuses at the output of each circuit;
    • automatic fuses at the input of each power block;
    • duplication of hardware protection with electronic and software;
    • electroless commutation of input contactors for each circuit.;
  • Mechanical construction
    • Cabinet dimensions (W x L x H) [mm] - up to 1200 x 650 x 2000;
    • At the bottom of the construction is provided space for eight 12 volt batteries with dimensions (W / L / H) 125 x 600 x 325 mm. and free space above the batteries with height 125 mm.;