BTS 600 A / 18 V

Life Cycle Testing- this is perhaps one of the most important tests. Cells are subjected to repeated charge - discharge cycles to verify that the cells meet or exceed the manufacturer's claimed cycle life. Cycle life is usually defined as the number of charge - discharge cycles a battery can perform before its nominal capacity falls below 80% of its initial rated capacity. These tests are needed to verify that the battery performance is in line with the end product reliability and lifetime expectations and will not result in excessive guarantee or warranty claims.;
Load Testing- load testing is used to verify that the battery can deliver its specified power when needed. The load is usually designed to be representative of the expected conditions in which the battery may be used. It may be a constant load at the C rate or pulsed loads at higher current rates or in the case of automotive batteries, the load may be designed to simulate a typical driving pattern.;
Others- with the help of our lab managing software "Battery test manager" it is possible to conduct other standard and specialized tests, according to the needs of the particular laboratory.;

Main features

Power supply: 3 х 380V / 50Hz / 19 KVA;
Number of independent circuits (single battery per circuit) - 6. All circuits are galvanically isolated!;
Ability to work in parallel mode;
Max.output current in charge and discharge mode for single channel - 100 A;
Max. output current in parallel mode : up to 600 A (depending on channels working in parallel);
Max.output voltage : 18 V;
Work modes: Charge, Discharge, CV, CC, CP;
PLC for each channel, which provides
- Temporary storage of test data in case of a lost connection to a PC and immediately sending it to the PC when connection is restored ;
- Visualization of main test parameters-current, voltage, amperhours etc.;
- Auto restart test after restoring of broken power supply;
- Data acquisition rate – 100 ms.;

Software features