CDT-2CH 3(4.4)/100

Back To List
  • Input : 3 х 380V / 50Hz / 6 000 VA
  • Output : 8 x 100 A / 3 V
  • Circuits per cabinet : Up to 8
  • Parallel work : Yes
  • It is mainly used in testing laboratories for specialized testing of low voltage batteries for the mass consumer market : nickel based (NiCd, NiMH, NiZn), lithium ion, even single cells of lea-acid batteries.Thanks to the flexible and functional software, all kinds of tests can be carried out, the information from which is collected and stored. Subsequently, this information can be analyzed both in software itself and in specialized data analysis software.;

Main features

  • Power supply: 3 х 380V / 50Hz / 6 000 VA;
  • Number of charge/discharge channels (single cell per channel) in cabinet : 8. All circuits are galvanically isolated!;
  • Ability to work in parallel mode;
  • Max. output current in charge and discharge mode for single channel : 100 A;
  • Max. output current in parallel mode : up to 800 A (depending on channels working in parallel);
  • Max.output voltage : 3V (4.4V - in another model) ;
  • Min. voltage in discharge mode : 0.9 V;
  • Accuracy of current : ± 0.2% FSR, Resolution: 0.01 A;
  • Accuracy of voltage : ± 0.1% Full Scale. Resolution: 0.001V;
  • ADC : 15 bit;
  • Galvanically isolated cell voltage measurement for each channel;
  • Galvanically isolated potentials measurement with reference electrode for each channel ;
  • Galvanically isolated temperature measurement for each channel;
  • Work modes: Charge, Discharge, CV, CC, CP
  • PLC for each channel, which provides
    • Temporary storage of test data in case of a lost connection to a PC and immediately sending it to the PC when connection is restored ;
    • Visualization of main test parameters-current, voltage, amperhours etc.;
    • Auto restart test after restoring of broken power supply;
    • Data acquisition rate – 100 ms.;
  • Electronic commutation when switching charge and discharge modes;
  • Mechanical construction
    • Modular (2 channels in a module);
    • Each module can operate independently, outside the cabinet, powered with 220 V power supply;
    • Cabinet dimensions (H X W x D) [mm] ;

Software features

  • Creation and editing of multi-step test programs,
  • Grouping circuits for parallel work,
  • Uploading, starting, stopping and interrupting of test programs,
  • Visualization of tester’s current state on main window,
  • Storing sample measurement data for all tests in a database
  • Visualization of stored data from database, drawing charts etc.,
  • Printing report data,
  • Export test data in Excel file format.